John Deere Omar287594 — Adjusting Implement Level

Hitch IMPORTANT: Check for implement interference. Drawbar removal may be necessary. 7. Slowly pull hitch control lever (B) to raise implement. Lower implement to ground and adjust upper height limit control if necessary. IMPORTANT: If center link is attached directly to implement, measure upper mast opening (A) and height above pin (B). If upper mast opening is greater than 70 mm (2.8 in.) or height above pin is less than 14 mm (0.6 in.), use shims to limit/restrict swiveling of yoke (C). If connecting to a category 4N hitch, use a combination of shims on both sides of center link pivot.

RXA0086593 —UN—09FEB06 Equipment Mast (Cat 3) A—Distance B—Distance C—Yoke RXA0088024 —UN—23MAR06 Equipment Mast (Cat 4) OURX935,00003E8 ­19­25AUG08­2/2 50­16 122208 PN=135