John Deere Omar287594 — Lubricating Independent Link Suspension Axle—Tie Rod Internal Ba

1500 Hour Service Lubricating Independent Link Suspension Axle—Tie Rod Internal Ball Joints NOTE: Contact your John Deere dealer for questions or assistance in lubricating the tie rod internal ball joints. 1. Remove boot retaining snap ring (A). 2. Remove tie band (B). 3. Slide boot (C) from inside steering rod (D) exposing ball joint. 4. Remove outer snap ring (E) from steering rod. RXA0085956 —UN—18JAN06 IMPORTANT: Remove any burrs in snap ring grooves using fine sand paper or Emery cloth. If not removed, damage to components will result. Thoroughly clean area inside steering rod removing all dirt and filings. If not, damage to components will result. 5. Remove snap ring retainer (F).

A—Boot Retaining Snap Ring B—Tie Band C—Boot D—Steering Rod E—Outer Snap Ring F—Snap Ring Retainer RXA0085957 —UN—18JAN06 RXA0085958 —UN—18JAN06 Continued on next page OURX935,00002DE ­19­19JUN08­1/2 106­7 122208 PN=287