John Deere Omar287594 — Replacing SCV Stack Filter

1500 Hour Service Changing MFWD Or Independent Link Suspension Wheel Hub Oil 1. Put the tractor on level surface. 2. Rotate wheel until drain/fill hole (A) is at bottom of hub. Remove plug and drain oil. 3. Rotate wheel with drain/fill plug positioned horizontally after oil has drained. RW26336 —UN—25JUN99 4. Add John Deere GL­5 Gear Lubricant through drain­fill hole until oil is even with bottom of hole. Replace plug. Wheel Hub Capacity (Each) Standard MFWD Axle ........................................... 3.4 L (3.6 qt) MFWD Axle with Independent Link Suspension ........... 4.0 L (4.2 qt) OURX935,00002DF ­19­19JUN08­1/1 Replacing SCV Stack Filter 1. Remove four cap screws (A). C D 2.

Remove cover (B). B NOTE: Filter kit comes with filter (C), O­ring (D) and spring (E). Install new filter, open end first, into front SCV filter housing. RXA0097300 —UN—19FEB08 3. Remove old SCV filter, O­ring and spring replace with new O­ring, spring and filter. E A 4. Replace cover, install cap screws and tighten alternately and evenly to torque specification. Specification Filter Cover Cap Screws—Torque................................... 6 N∙m (53 lb­in.) A—Cap Screws B—Cover C—Filter D—O­Ring E—Spring OURX935,0000301 ­19­19JUN08­1/1 106­9 122208 PN=289