1500 Hour Service Replacing Front Hitch SCV Filter—If Equipped 1. Remove two cap screws (C). 2. Remove cover (B). NOTE: Filter kit comes with filter (E), Oring (F) and spring (D). Install new filter, open end first, into front SCV filter housing. RXA0097145 —UN—18FEB08 3. Remove old filter, Oring and spring, then replace with new Oring, spring and filter. 4. Replace cover, install cap screws and tighten alternately and evenly to torque specification. Specification Filter Cover Cap Screws—Torque...................................
6 N∙m (53 lbin.) A—SCV B—Cover C—Cap Screws D—Spring E—Filter F—ORing RXA0097147 —UN—18FEB08 RXA0097186 —UN—18FEB08 OURX935,0000303 1919JUN081/1 Lubricating Draft Link Support Shaft Bushing Use John Deere SD Polyurea grease or other grease as specified in Fuel, Lubricants and Coolant section. Apply one or two shots of grease to support shaft bushing (A). RXA0078654 —UN—21JAN05 A—Support Shaft Bushing OURX935,00002E0 1919JUN081/1 10610 122208 PN=290