John Deere Omar287594 — Removing and Installing Fan Belt

General Services 8. Using wrench (H) on square tab, hold front pulley (I) and remove cap screw (J). C IMPORTANT: When prying front pulley forward, make sure that roll pins and belt contact surface of pulley are not damaged. A RXA0085942 —UN—18JAN06 NOTE: make sure that roll pins (A) are not damaged when prying front pulley forward or if they come off with pulley, that they are not lost. A 9. Pry front pulley (C) evenly off shaft (B). B 10. Remove six nuts (D) and carefully position fan (E) forward against radiator. Bleeding Drive Assembly 11. Remove belt (F) through opening between fan and fan hub (G). D E 12. Discard old belt. 13.

Install new fan belt between fan and fan hub so that it is positioned between lower pulley halves. RXA0085951 —UN—18JAN06 14. Slide fan into place, install nuts and torque to specification. Fan­to­Drive Assembly —Specification Nut—Torque .................................................................... 35 (26 lb­ft) D A—Roll Pins B—Shaft C—Front Pulley D—Nuts E—Fan F—Belt G—Fan Hub Remove Six Nuts F E RXA0085952 —UN—18JAN06 H G Continued on next page OURX935,000050F ­19­16SEP08­2/3 Remove Belt 110­7 122208 PN=304