John Deere Omar287594 — Aiming Head Lights

Electrical Services Rear Fender HID Bulb Replacement: 1. Remove cap screws (A) and bezel (B). B C D E 2. Carefully pull reflector (C) with lamp (D) out of cover far enough to unplug wiring harness (F). A RXA0085596 —UN—13FEB06 3. Press in on HID light assembly and remove retainer (E) with a screw driver. Remove lamp from reflector. 4. Install new lamp in reflector and install retainer. 5. Connect wiring harness plug to new HID light assembly. Install HID light assembly in cover and install bezel and cap screws. F A—Cap Screw B—Bezel C—Reflector D—Lamp E—Retainer F—Wiring Harness OURX935,000031C ­19­12JUN08­2/2 Adjusting Front Grille Lights RXA0080172 —UN—08APR05 RXA0080168 —UN—08APR05 1.

To remove bezel, place one hand on each side of bezel (A) and pull straight back. 2. Adjust the light beam by turning aiming screws (B). 3. To return light to factory setting, adjust cap screws so the screw tips (D) are flush with plastic retainers (C), then adjust light beams from there. A—Position B—Aiming Cap Screws C—Plastic Retainers D—Screw Tips RXA0080565 —UN—02AUG05 OURX935,000031D ­19­12JUN08­1/1 120­6 122208 PN=316