WHEN REQUIRED Replacing inner element Cleaning outer element 2. 1. First remove the outer element. Remove the inner element. With compressed air 3. Place the cover over the air intake 4. Clean the air cleaner body interior, part to prevent dust entering. then remove the cover from the air intake port. Ir for looseness and, if necessary, Checkinnerelementmountingnuts 5. Fit a new inner element and tig hten it with nuts. retighten. 6. Install the outer element and the * (2) if they are broken. Replaceseal washer (4)orwing nut cover. Push the dust indicator reset button. inner element.
A Do not clean or replace the air Ir Donotattempttoreinstallacleaned 7 kg/cm21 to element from inside along Directdrycompressedair(lessthan its folds, then direct it from outside cleaner element with the engine and check element. A When using compressed air, wear along its folds and again from inside, running. safety glasses and other things required to maintain safety. -120-