11. On the rear of left control stand in cabin is a vernier caliper throttle control. The throttle control is a push/pull and/or screw type assembly. The locking collar (7, Figure 44) at base of mechanism must be turned to the released position before the throttle can be adjusted. Quick adjustment of engine speed can be made by turning the locking collar to the "RELEASED" position and "DEPRESSING" the button (9) (in center of knob (8)). Pulling the knob "OUT" increases rpm's, or pushing it "IN" decreases rpm's. Fine adjustment of engine speed can be made by turning the knob. Turn knob counterclockwise to increase engine speed and clockwise to decrease engine speed.
Once the desired rpm is obtained, turn the locking collar (7) to the locked position. 2 5 6 3 1 10 4 9 8 7 BRO0050L Figure 44 022-00058E Operation and Maintenance Manual Operation 3-21