daewoo Solar 140LC-V — Mode Selection

MODE SELECTION More efficient work can be done by choosing a proper power and work mode combination, suitable to type of work and conditions. Use the mode selection according to following guide. Power Mode 1. When the starter switch is turned "ON" the power mode is automatically defaulted to "Standard Mode." 5 6 7 2. Select a proper power mode using buttons (Figure 45) before starting work. 3. When the power mode button (1, Figure 45) is pressed, a signal sounds, changing the power mode to either "Power Mode" or "Standard Mode." When the power mode is turned "ON," the LED indicator (5, Figure 45) turns "ON." 1 2 3 4 ARO0480L Figure 45 Deactivate the power mode by pressing it a second time.

When the power mode is turned "OFF," the LED indicator (5, Figure 45) turns "OFF" and the power mode returns to the standard mode. 3-22 Operation 022-00058E Operation and Maintenance Manual Mode Selection Point STANDARD MODE General work. Minimize fuel consumption. POWER MODE Required to perform heavy work in a short period of time. Fast speed loading. Fast speed travel.