CHECK LEVEL OF HYDRAULIC OIL TANK WARNING! The hydraulic oil will be hot after normal machine operation. Allow the system to cool before attempting to service any of the hydraulic components. The hydraulic tank is pressurized. Turn the breather cap slowly to allow the pressurized air to vent. After the pressure has been released, it is safe to remove either the fill cap or service covers. ARO1760L Figure 13 1. Position the machine on firm, level ground. Lower boom and position bucket on ground as shown in Figure 14. 2. Set engine speed to "LOW IDLE." HAOC360L Figure 14 3. Set safety lever to "LOCK" position. 4. Check level gauge by opening right access door.
Oil level must be between marks on sight gauge. Figure 15 022-00058E Operation and Maintenance Manual Inspection, Maintenance and Adjustment 4-13