daewoo Solar 140LC-V — Hydraulic Oil Exchange and Suction Strainer Cleaning

5. Drain hydraulic oil from tank into a container capable of holding 220 liters (58 U.S. gal.). After draining tank install drain plug. IMPORTANT Be careful of squirting oil when removing drain plug. NOTE: Used filter and used oil should always be disposed of according to local regulations. Figure 78 6. Carefully remove bolts and cover (2, Figure 80) from top of hydraulic oil tank. There is a spring (3) under the cover that will force the cover up. 7. Remove spring (3, Figure 80) and strainer (5), by pulling on rod (4). A 8. Clean inside and outside of strainer. Replace strainer if it is broken. 9. Position strainer (5, Figure 80) on boss portion of suction pipe (6). NOTE:

Measurement "A" is 548 mm (21.57 in). HAOC411L Figure 79 022-00058E Operation and Maintenance Manual Inspection, Maintenance and Adjustment 4-47