. MAINTENANCE SERVICE PROCEDURE CHANGE OIL IN BRAKE OIL TANK, REPLACE BRAKE OIL FILTER ELEMENT WARNING again. 4 - 67 Immediat ely after the engine i s stopped, its parts and oi l are still ve ry hot, and may cause burn inju ry. Accordingly, wait unti they have cooled down befor e starting the work. release the internal pressure, then remove it. When rem oving the oil filler c ap, turn it slowly to releas e the interna Prepare a filter wrench Refill am ount of oil:
115 lit ers (30.38 US gal ) (includin g oil in the transmission case and Perform th e following items a t the same time i n orde r to drain REPLA CE TRANSMISSI ON FILTER ELEMENT (PAGE 4- CHANG E OIL IN TRANS MISSION CASE ( PAGE 4-65) CHANG E OIL IN BRAKE OIL TANK, REPLACE BRAKE O IL FILTER ELEMENT (PAG 1. Depres s the brake pedal at least 20 times to reduce the pr essure inside the brake cont 2. Set the container to catc h the oil directly u nder d rain plug ( Remov 3. Set a c ontainer to catch th e oil immediately under the f ilter ca (1), the n remove filter ca 4.
Take o ut the element an d wash the inside of the filte r case Replac e O-ring (2) and b ackup ring (3) on the fi new pa rts, coat thinly wit h clean oil, then i nstall. 5. Assem ble a new elemen t in the filter case , coat the O-ring the element thinly with cl Tightening torque: 78.4 t {8 to 1 the ele ment thinly with cl ean oil, then insta Tightening torque: 78.4 t 0 kgm, 57.9 to 7 2.3 lbft