Kubota — 6. Adjusting parking brake lever

EVERY 100 HOURS PERIODIC SERVICE 2. Slightly depress the brake pedals and measure free travel at the top of pedal stroke. 2. Further step on the right-hand pedal (the left-hand pedal slightly raises itself) and measure the level difference between the pedals. 3. Do the same for the left-hand pedal. 5. Checking gear-locked parking brake WARNING To avoid personal injury or death: Do not dismount the tractor while checking the gear-locked parking brake. Confirm the tractor (tractor unit only) can surely be parked on the slope of about 15 degrees (slope that rises by 2.7 meters every 10 meters). If the tractor moves, consult your local KUBOTA Dealer.

Always engage the gear-locked parking brake before dismounting the tractor. 6. Adjusting parking brake lever (1) Brake pedals (A) “FREE TRAVEL” NOTE : Brake pedals should be equal when depressed. 4.2 Checking brake pedal stroke WARNING To avoid personal injury or death: Park on flat ground, stop the engine and chock the wheels before checking the parking brake. 1. Disengage the brake pedal lock. 2. Depress the brake pedal several times. 3. Step on the right-hand pedal and measure the level difference (pedal stroke) between this pedal and the left-hand pedal. 4. Do the same for the left-hand pedal. 1.

Raise the parking brake lever to the parking position while counting the ratchet sound made by the parking lever. 2. If adjustment is needed, detach the cover of the parking brake lever and tighten the 2 adjusting nuts to adjust the free travel of the lever. (See Detaching cover on page 116.) (1) Brake pedal (LH) (2) Brake pedal (RH) (3) Brake pedal lock (A) “PEDAL STROKE” 4.3 Checking equalizer working level (anti- imbalance device) 1. Gently step on both brake pedals at once. M5091N, M5101N 115 Pedal stroke Less than 100 mm at each pedal Proper parking brake lever free travel 3 to 5 notches (Ratchet sound 3 to 5) Equalizer working level Minimum level difference of 5 mm between both pedals