Kubota — 7. Checking battery condition

PERIODIC SERVICE EVERY 100 HOURS 3. After adjusting the lever, reattach the parking brake cover. (See Attaching cover on page 116.) (1) Push rivet (2) Cover (3) Rivet head (4) Recess (5) Center rivet (6) Rivet assembly (A) “TURN COUNTERCLOCK- WISE” (B) (1) Parking brake lever (2) Cover (A) 6.2 Attaching cover To attach the cover, install the 2 push rivets: 1. Reposition the cover. 2. Pull out the center rivet from the assembly and put the rivet end into the cover mounting hole. 3. Push the rivet head all the way in. (1) Adjusting nut 6.1 Detaching cover To detach the cover, remove the 2 push rivets: 1.

Hold the rivet around its head, apply a Phillips screwdriver to the recess and turn the center rivet counterclockwise. 2. Pull out the push rivet assembly and detach the cover. (1) Push rivet (2) Cover (3) Center rivet (4) Rivet assembly (5) Rivet end (6) Rivet head (A) 7. Checking battery condition DANGER To avoid the possibility of battery explosion: For the refillable type battery, follow the instructions below. Do not use or charge the refillable type battery if the fluid level is below the [LOWER] (lower limit level) mark. Otherwise, battery component parts may prematurely deteriorate, which may 116 M5091N, M5101N