Kubota — 1. Adjusting front axle pivot

EVERY 500 HOURS PERIODIC SERVICE 2. If the hoses and clamps are found to be worn or damaged, replace or repair them at once. 10. Checking brake hose 1. Check to see that hoses and hose clamps are tight and not damaged. 2. If hoses and clamps are found worn or damaged, consult your local KUBOTA Dealer for this service. (1) Hose (2) Hose clamps M5101N (1) Brake hose 11. Checking air conditioner pipe and hose 1. Check to see that all lines and hose clamps are tight and not damaged. 2. If hoses and clamps are found to be worn or damaged, consult your local KUBOTA Dealer for this service. EVERY 600 HOURS (1) Hose (2) Hose clamps 1.

Adjusting front axle pivot If the front axle pivot pin adjustment is incorrect, front wheel vibration can occur, causing vibration in the steering wheel. 9. Checking lift cylinder hose 1. Check to see that hoses and hose clamps are tight and not damaged. 2. If hoses and clamps are found worn or damaged, replace or repair them at once. Adjusting procedure 1. Loosen the lock nut and screw-in the adjusting screw until seated. 2. Tighten the screw by an additional 1/6 turn. (1) Lift cylinder hoses M5091N, M5101N 125