Kubota — 1. Remote control valve

3-POINT HITCH CONTROL SYSTEM HYDRAULIC UNIT draft control lever to the point where the implement is at the desired depth. This stops the implement from going too deep and causing loss of traction and ground speed. REMOTE HYDRAULIC CONTROL SYSTEM The hydraulic auxiliary control valves can be installed with up to 5 segments. 1. Remote control valve There are 3 types of remote valves available for these models. Double acting valve with detents and self canceling: This valve may be placed in the detent mode. The lever will stay in this position until the pressure reaches a predetermined level or a cylinder reaches the end of its stroke. Then it will automatically return to neutral.

Double acting valve with float position: This valve may be placed in the float mode with the control lever all the way forward. The cylinder is free to extend or retract, letting an implement such as a loader bucket follow the ground. Single or double acting valve: This valve can be utilized as single or double acting valve by adjusting the auxiliary control valve selector knob located on the valve. 1. Turn the auxiliary control valve selector knob clockwise all the way to utilize as single acting valve. 2. Turn the auxiliary control valve selector knob anticlockwise all the way to utilize as double acting valve. (1) Ground surface (2) Implement penetration limit (3) Light soil 4.

Float control Place both the draft control lever and the position control lever in the float position to make the lower links move freely along with the ground conditions. 5. 3-point hitch lowering speed knob WARNING To avoid personal injury or death: A fast lowering speed may cause damage or injury. The lowering speed of the implement should be adjusted to 2 or more seconds. The lowering speed of the 3-point hitch can be controlled by adjusting the 3-point hitch lowering speed knob. (1) Single or double acting valve (2) Auxiliary control valve selec- tor knob (A) Double acting (B) Single acting (1) 3-point hitch lowering speed knob (A) (B) (C) M5091N, M5101N 79