. MAINTENANCE SERVICE PROCEDURE CLEAN TRANSMISSION BREATHER CHANGE OIL IN FINAL DRIVE CASE WARNING Tightening torque: 58.8 to 78.4 Nm (6 to 8 kgm , 43.4 to 57.9 lbft) 4 - 66 1. Stop the engine a nd wait for the tempera ture at all p arts t o go down. 2. Remove all mud a nd dirt from around the 3. Remove the breat her and fit a cover to th e breather mounting hole to prevent dir 4. Soak the breather in flushing liquid and w 5. Install the breathe The parts and oil are at hi gh temperature immediate ly after the e ngine is stopped, and may cause burns . Wait for the temperature to g o down before startin g the work. Refill amount of oil: 17 liters (4.49 US gal) (with differential lock) 1.
Set a container un der the final drive case to catch th e oil. 2. To prevent getting oil on yourself, loosen drain plug (P) and and 3. drain the oil. To prevent the oil f gradually remove After draining the rom spurting out, loosen drain plug (P), then it. oil, install drain plug (P). 4. Pour in the specifi ed amount of engine oi l from oil fil ler (F) . 5. 6. After refilling, che details, see "CHE ADD OIL (PAGE Check for oil leaka ck that the oil is at the specified level. For CK OIL LEVEL IN FINAL DRIVE CASE, 4-51)". ge from the final drive case.