63 Maintenance Section Cooling System Specifications Caterpillar ELC Extender Note: Caterpillar developed the EC-1 specification. The EC-1 specification is an industry standard. The EC-1 specification defines all of the performance requirements that are needed for an engine coolant to be sold as an extended life coolant for Caterpillar engines. ELC can be used in most OEM engines of the following types: diesel, gasoline, and natural gas. ELC meets the performance requirements of “ASTM D4985” and “ASTM D5345” for heavy-duty low silicate antifreeze/coolants. ELC also meets the performance requirements of “ASTM D3306” and “ASTM D4656” for automotive applications.
Caterpillar ELC Extender is added to the cooling system halfway through the ELC service life. Treat the cooling system with ELC Extender at 3000 hours or one half of the coolant service life. Use Table 18 in order to determine the proper amount of ELC Extender that is required. Containers of several sizes are available. Consult your Caterpillar dealer for the part numbers. Table 18 i01111712 Extended Life Coolant (ELC) Cooling System Maintenance SMCS Code: 1350; 1352; 1395 Proper additions to the Extended Life Coolant NOTICE Use only Caterpillar products or commercial products that have passed Caterpillar’s EC-1 specification for pre-mixed or concentrated coolants.
Use only Caterpillar Extender with Extended Life Coolant. For cooling system capacities that exceed the capacities that are specified in Table 18, use the equation that is in Table 19 in order to determine the proper amount of ELC Extender that is required. Mixing Extended Life Coolant with other products re- duces the Extended Life Coolant service life. Failure to follow the recommendations can reduce cooling sys- tem components life unless appropriate corrective ac- tion is performed.
Table 19 Equation For Adding ELC Extender To ELC In order to maintain the correct balance between the antifreeze and the additives, you must maintain the recommended concentration of Extended Life Coolant (ELC). Lowering the proportion of antifreeze lowers the proportion of additive. This will lower the ability of the coolant to protect the system from pitting, from cavitation, from erosion, and from deposits. V Ч 0.02 = X V is the total volume of the cooling system. X is the amount of ELC Extender that is required. Table 20 is an example for using the equation that is in Table 19.
NOTICE Do not use a conventional coolant to top-off a cooling system that is filled with Extended Life Coolant (ELC). Table 20 Do not use standard supplemental coolant additive (SCA). Only use ELC Extender in cooling systems that are filled with ELC.
Caterpillar ELC Extender Additions by Cooling System Capacity Cooling System Capacity Addition of ELC Extender 22 to 30 L (6 to 8 US gal) 0.57 L (20 fl oz) 31 to 38 L (9 to 10 US gal) 0.71 L (24 fl oz) 39 to 49 L (11 to 13 US gal) 0.95 L (32 fl oz) 50 to 64 L (14 to 17 US gal) 1.18 L (40 fl oz) 65 to 83 L (18 to 22 US gal) 1.60 L (54 fl oz) 84 to 114 L (23 to 30 US gal) 2.15 L (72 fl oz) 115 to 163 L (31 to 43 US gal) 3.00 L (100 fl oz) 164 to 242 L (44 to 64 US gal) 4.40 L (148 fl oz) Example Of The Equation For Adding ELC Extender To ELC Total Volume of the Cooling System (V) Multiplication Factor Amount of ELC Extender that is Required (X) 946 L (250 US gal) × 0.02 19 L (5 US gal)