Caterpillar — Maintenance Interval Schedule

75 Maintenance Section Air Compressor - Inspect After cleaning, start the engine and accelerate the engine to high idle rpm. This will help in the removal of debris and drying of the core. Stop the engine. Use a light bulb behind the core in order to inspect the core for cleanliness. Repeat the cleaning, if necessary. If the air compressor pressure relief valve that is mounted in the air compressor cylinder head is bypassing compressed air, there is a malfunction in the air system, possibly ice blockage. Under these conditions, your engine may have insuffi- cient air for normal brake operation. Inspect the fins for damage. Bent fins may be opened with a “comb”. Note:

If parts of the aftercooler system are repaired or replaced, a leak test is highly recommended. The FT1984 Aftercooler Testing Group is used to perform leak tests on the aftercooler. Refer to the Systems Operation/Testing and Adjusting, “Aftercooler - Test” and the Special Instruction, SEHS8622 for the proper testing procedure. Do not operate the engine until the reason for the air bypass is identified and corrected. Failure to heed this warning could lead to property damage, personal injury, or death to the operator or by- standers. The function of the air compressor pressure relief valve is to bypass air when there is a malfunction in the air compressor system.

Inspect these items for good condition: welds, mounting brackets, air lines, connections, clamps, and seals. Make repairs, if necessary. The air compressor pressure relief valve releases air at 1723 kPa (250 psi). It is very important that all personnel stand clear of the air compressor pressure relief valve when compressed air is released. All personnel should also stay clear of the air compressor when the engine is operating and the air compressor is exposed. For more detailed information on cleaning and inspection, see Special Publication, SEBD0518, “Know Your Cooling System”.

i01183385 Air Compressor - Inspect Refer to the Service Manual or refer to the OEM specifications in order to find information concerning the air compressor. Consult your Caterpillar dealer for assistance. SMCS Code: 1803-040 i01544231 Air Compressor Filter - Clean/Replace (If Equipped) Do not disconnect the air line from the air com- pressor governor without purging the air brake and the auxiliary air systems. Failure to purge the air brake and the auxiliary air systems before re- moving the air compressor and/or the air lines could cause personal injury. SMCS Code:

1803-070-FQ; 1803-510-FQ One of the single most important aspects of preventive maintenance for the air compressor is the induction of clean air. The type of maintenance that is required for the air compressor and the maintenance interval depends on the type of air induction system that is used. Operating conditions (dust, dirt and debris) may require more frequent service. Refer to the Service Manual for the type of air compressor that is installed on the engine. Follow the maintenance recommendations that are provided by the OEM of the air compressor. Some engines use boost air pressure so the engine air cleaner will require servicing.

g00633741 Illustration 31 (1) Air compressor pressure relief valve