Section 8 Electrical System and Components Figure 8-24. Retaining Ring Detail. Figure 8-25. Removing Retaining Ring. 11. Remove the retainer from the armature shaft. Save the stop collar. 12. Remove the drive pinion assembly from the armature. NOTE: Do not reuse the old retainer. 13. Clean the parts as required. NOTE: Do not soak the armature or use solvent when cleaning. Wipe clean using a soft cloth, or use compressed air. Figure 8-26. Delco-Remy Starter. 8.15 Screw Collar Ring Plunger Stop Spring Drive Lever Plate Plug Armature Solenoid Frame & Field Washer Brush Holder Nut Tube CE Frame Screw Bolt 8