Aegis LH630-775 — Section 9 - Disassembly

Section 9 Disassembly Figure 9-12. Removing the Radiator. 6. Disconnect the connector plug from the rectifier- regulator and remove the mounting plate, with rectifier-regulator attached. Figure 9-10. Disconnecting Upper and Lower Radiator Hose. 4. Remove the four screws securing the two upper radiator supports to the air cleaner mounting bracket. See Figure 9-11. Figure 9-13. Disconnecting the Rectifier-Regulator. 7. Remove the four screws securing the LH and RH side mounting brackets to the crankcase. Pull the complete mount assembly forward to remove. See Figure 9-14. Figure 9-11. Remove Upper Radiator Support Screws. 5.

Carefully tilt (pull) the radiator forward slightly to clear the fan and lift the complete assembly out of the lower mounting bracket. See Figure 9-12. NOTE: Do not allow the cooling fins of the radiator to contact the fan blades. Figure 9-14. Removing LH and RH Mounting Brackets/Screws. 9.4