Aegis LH630-775 — Section 9 - Disassembly

Section 9 Disassembly 4. Remove the hex flange screw, breather reed retainer and breather reed from the breather chamber. See Figure 9-28. Figure 9-30. Removing Valve Covers and Gaskets. Remove Lower Drive Pulley and Fan Belt 1. Remove the four screws attaching the lower drive pulley assembly to the pulley adapter and flywheel. See Figure 9-31. Figure 9-28. Removing the Breather Reed Assembly Parts. Remove Valve Covers 1. Remove the hex flange screws from the two lower valve cover mounting locations on each side. See Figure 9-29. Figure 9-31. Removing Lower Pulley Four Screws. Figure 9-29. Removing Two Lower Valve Cover Screws. 2. Remove the valve covers and valve cover gaskets.

Note on which side the oil fill or fuel pump is located, for correct reassembly later. See Figure 9-30. 9.8