Aegis LH630-775 — Section 11 - Reassembly

Section 11 Reassembly Figure 11-90. Lower Pulley and Shim Details. Figure 11-92. Installing Upper Pulley Bracket. Figure 11-91. Installing Lower Pulley. Figure 11-93. Wiring Through Intake Manifold Cutout and Behind Upper Bracket. 4. Install the upper fan mounting bracket to the intake manifold with the two screws. See Figure 11-92. Torque: 5. If disassembled, reassemble the fan and pulley assembly as shown in Figures 11-94, 11-95, and 11-96. M6 Screws to 7.3 N·m (65 in. lb.) M8 Screws to 24. 4 N·m (216 in. lb.) The by-pass hose and wires must be positioned within the cutout in the intake manifold, as shown in Figure 11-93.

Be careful not to pinch the harness wires between the bracket and intake manifold when tightening. Figure 11-94. Fan Assembly Components - Disassembled Layout. 11.26