Aegis LH630-775 — Section 11 - Reassembly

Section 11 Reassembly Figure 11-109. Preassembled Radiator for Installation. Figure 11-111. Setting Radiator Assembly into Place. 2. Tighten the radiator drain plug. See Figure 11-110. 4. Position the upper radiator support brackets on top of the air cleaner mounting bracket. Install and finger tighten the four mounting screws. Figure 11-112. Installing Upper Support Screws. 5. Connect the upper and lower radiator hoses to the inlets of the radiator and water pump. Secure with the hose clamps. See Figures 11-113 and 11-114. Make sure the tangs of upper clamp face away from the fan. Figure 11-110. Tightening Drain Plug. 3.

Carefully set the radiator assembly into place, guiding the lower radiator hose inside RH support bracket. Make sure that cooling fins do not come in contact with the fan blades as radiator is installed. 11.30