Section 11 Reassembly Figure 11-116. Torquing Side Support Screws. Figure 11-113. Installing Upper Hose Connection. 7. Hold the radiator assembly in position; then torque the screws securing the two upper radiator supports to 9.9 N·m (88 in. lb.) . See Figure 11-117. Figure 11-114. Installing Lower Radiator Hose Clamp. 6. Check for adequate clearance between fan and shroud. Adjust the lower radiator supports as required, then torque the four mounting screws to 9.9 N·m (88 in. lb.) . See Figures 11-115 and 11-116. Figure 11-117. Torquing Upper Bracket Screws. 8. If the two flange nuts securing the upper brackets to the top radiator mounts were loosened, torque to 9.9 N·m (88 in. lb.) .
See Figure 11-118. 11 Clearance Figure 11-115. Fan Clearance Checking. 11.31