Section 8 Electrical System and Components Electronic CD Ignition Systems DC Voltmeter Operation of CD Ignition Systems Capacitive Discharge with Fixed Timing. This system consists of the following components. See Figure 8-3. A magnet assembly which is permanently affixed to the flywheel. Two electronic capacitive discharge ignition modules which mount on the engine crankcase. A kill switch (or key switch) which grounds the modules to stop the engine. Battery Two spark plugs. Figure 8-2. Battery Voltage Test. The timing of the spark is controlled directly by the location of the flywheel magnet group as referenced to engine top dead center.
Kill Switch or ‘‘Off’’ Position of Key Switch Ignition Modules Spark Plug 0.008/0.012 in. (0.20/0.30 mm) Air Gap Magnet Flywheel Figure 8-3. Capacitive Discharge Ignition System. 8.4