Aegis LH630-775 — Section 8 - Electrical System

Section 8 Electrical System and Components Eyelet Terminal for Ignition Key Switch (or Starter Post) Carburetor Solenoid Diodes Oil Pressure Safety Red Green Ignition Module Input Red B+ and Carburetor Solenoid Input White Ignition Modules Spark Plugs Oil Pressure Safety Input Violet Flywheel/Stator B+ White Rectifier-Regulator Figure 8-4. Electronic CD Ignition System (For Customer Connected Tractor Applications). Figure 8-5. Capacitive Discharge Ignition Module. Operation: As the flywheel rotates, the magnet grouping passes the input coil (L1). The corresponding magnetic field induces energy into the input coil (L1). The resultant pulse is rectified by D1 and charges capacitor C1.

As the magnet assembly completes its pass, it activates the triggering device (L2), which causes the semiconductor switch (SCS) to turn on. With the device switch “ON,” the charging capacitor (C1) is directly connected across the primary (P) of the output transformer (T1). As the capacitor discharges, the current initiates a fast rising flux field in the transformer core. A high voltage pulse is generated from this action into the secondary winding of the transformer. This pulse is delivered to the spark plug gap. Ionization of the gap occurs, resulting in an arc at the plug electrodes. This spark ignites the fuel-air mixture in the combustion chamber.

Troubleshooting CD Ignition Systems The CD ignition systems are designed to be trouble free for the life of the engine. Other than periodically checking/replacing the spark plugs, no maintenance or timing adjustments are necessary or possible. Mechanical systems do occasionally fail or break down however, so the following troubleshooting information is provided to help you get to the root of a reported problem. CAUTION: High Energy Electric Spark! The CD ignition systems produce a high energy electric spark, but the spark must be discharged, or damage to the system can result. Do not crank or run an engine with a spark plug lead disconnected.

Always provide a path for the spark to discharge to ground. 8.5 D1 C1 T1 SCS Spark L1 Plug L2 P S 8