Freightliner — FLA COE, FLB COE, FLC112 Conventional, FLD Conventional, FLL COE

Suspension 32 1 4 3 2 09/15/95 f320423 1. Frame Rail 2. Axle Housing 3. Axle Centerline 4. Suspension Ride Height Fig. 20, Neway Ride Height Inspection Rear Suspension Freightliner Spring Single Axle 1 No lubrication is required on Freightliner single axle rear suspensions. Tandem Axle A Lubricate the equalizer cap-and-tube assembly bush- ings by applying multipurpose chassis grease at the grease fitting until the old grease is forced out from the cap-and-tube assembly. See Fig. 21 . Hendrickson Spring Suspension, RT2 and RTE2 Series 320020a 05/27/93 1 A. Lubricate here. 1. Cap-and-Tube Assembly Bushing Fig.

21, Equalizer Assembly Lubrication Lubricate the bronze, ball-indented bushings in the spring eye, as follows: hicle with safety stands. This relieves the load on the bushings and pins to allow the proper flow of lubricant around them. 1. Park the vehicle on a level surface, apply the parking brakes, and chock the front tires. 2. Raise the rear of the vehicle until the rear wheels are suspended in the air, then support the ve- 3. Using a multipurpose chassis grease, lubricate the bronze, ball-indented bushings in the spring eyes at the grease fitting. See Fig. 22 . Continue Heavy-Duty Trucks Maintenance Manual, October 2009 32/11