Freightliner — FLA COE, FLB COE, FLC112 Conventional, FLD Conventional, FLL COE

Rear Axle 35 Eaton Tandem Drive Axle Lubricant Capacities Axle Type Axle Model Capacity * : pints (liters) Axle Type Axle Model Capacity * :

pints (liters) DS341 39 (18.5) DT401, 401–P 39 (18.5) RS341 36 (17) RT401 36 (17) DS381, 381–P 39 (18.5) DT402, 402–P 34 (16.1) RS381 36 (17) RT–402 34 (16.1) Dual Range (2-Speed) DS401, 401–P 39 (18.5) DT451, DT451–P 39 (18.5) DS402, 402–P 39 (18.5) DT461–P 43 (20.3) RS401 36 (17) RT451 34 (16.1) RS402 36 (17) RT461 40 (18.9) Single Reduction DS404 39 (18.5) DP451–P 34 (16.1) DS451, 451–P 39 (18.5) DP461–P 43 (20.3) RS404 36 (17) RP451 34 (16.1) RS451 36 (17) RP461 40 (18.9) DS460–P 44 (20.8) DP521–P 42 (19.9) Double Reduction DS461–P 43 (20.3) DP601–P 42 (19.9) RS460 40 (18.9) RP521 39 (18.5) RS461 40 (18.9) RP601 39 (18.5) DS581–P 42 (19.9) DP651–P 41 (19.4) RS581 39 (18.5) RP651 37 (17.5) * Quantities listed are approximate.

Fill axle until lubricant is level with bottom of fill hole with vehicle on level ground. Add 2 pints (1 L) of additional lubricant to the power divider. Table 4, Eaton Tandem Drive Axle Lubricant Capacities Meritor Axle Lubricant Changing and Oil Filter Replacing Axle Lubricant Change-Interval Information 160 to 220°F (71 to 104°C). Chemicals and additives that give these lubricants increased load-carrying ca- pacity, oxidize faster at temperatures above 220°F (104°C), contributing to more rapid lubricant deterio- ration. For this reason, lubricants of this type, that operate continuously at high temperatures, must be changed more frequently to realize the inherent ad- vantages they offer.

A regular schedule for changing axle lubricant in a particular vehicle and operation can be accurately determined by analysis of oil samples taken from the assembly at specific intervals or mileages. The final schedule recommended may, for economic reasons, be correlated with lubricant changes governed by climatic conditions and magnetic plug maintenance. Lubricant changes should be made as climatic tem- peratures demand, regardless of vehicle mileage or established change schedule. CAUTION Failure to change the axle lubricant at more fre- quent intervals, when adverse operating condi- tions require, could result in axle damage.

Traction Equalizer Additives Normal operating temperature of compounded lubri- cants during the summer season is approximately Single drive axles equipped with traction equalizers may require a "limited-slip friction modifier" to correct a slip-stick condition, as described in the vehicle driv- Heavy-Duty Trucks Maintenance Manual, January 1997 35/6