Freightliner — FLA COE, FLB COE, FLC112 Conventional, FLD Conventional, FLL COE

Steering 46 Approved Power Steering Fluids For a 3-line system, drain the power steering reservoir by disconnecting the steering gear-to- reservoir return hose from the reservoir, and catch the fluid in a drain bucket. Disconnect the power steering pump-to-reservoir return (bypass) hose from the reservoir fitting. Remove the fitting from the reservoir, and connect it to the bypass hose, then cap the bypass hose fitting and both reservoir ports. See Fig. 9 or Fig. 10 . Automatic Transmission Fluid * Dexron ® II Dexron ® III Fluid Type Approved Fluid Heavy-Duty Engine Oil * Union Texaco Chevron Union Shell Rotella T 10W–40 10W–40 10W–40 15W–40 30W IMPORTANT:

Do not use heavy-duty engine oil in vehicles built from November 4, 2002. 1 * Do not mix oil types. Refer to the text in this group for a detailed warning statement. Table 1, Approved Power Steering Fluids 2 3 2. For a 9-quart power steering reservoir, remove the dipstick, band clamp, cover O-ring, and cover. See Fig. 9 . 1 2 4 5 05/28/93 6 f460295a 1. Dipstick T-Handle 2. Cover Capscrew 3. Reservoir Cover 4. Reservoir-to-Pump Supply Hose 5. Pump-to-Reservoir Return (bypass) Hose 6. Gear-to-Reservoir Return Hose 6 3 4 5 Fig. 10, 2-Quart Power Steering Reservoir, 3-Line 08/11/93 f460013 4.

If equipped with a thumbscrew, remove the thumbscrew and spring that hold the filter ele- ment in the reservoir, and lift out the filter ele- ment. Otherwise, lift out the spring and filter ele- ment from the reservoir. 1. Dipstick T-Handle 2. Band Clamp 3. Hose Fittings 4. Pump-to-Reservoir Return (bypass) Hose 5. Gear-to-Reservoir Return Hose 6. Reservoir-to-Pump Supply Hose 5. Thoroughly clean the reservoir with a lint-free cloth. Fig. 9, 9-Quart Power Steering Reservoir, 3-Line 6. Install a new filter element in the reservoir and position the spring on top of the filter element. If so equipped, install and hand-tighten the thumb- screw to hold the spring and filter element in place. 3.

For a 2-line system, drain the power steering reservoir by disconnecting the steering gear-to- reservoir return hose from the reservoir. Catch the fluid in a drain bucket. Cap the reservoir port. Heavy-Duty Trucks Maintenance Manual, November 2002 46/4