Frame and Fifth Wheel 31 1 2 3 18 17 4 5 15 6 10 7 16 8 15 9 14 14 12 11 13 08/29/95 f310472 13 1. Locknut, 3/4–16 2. Washer 3. Rubber Washer 4. Lock Adjustment Tag 5. Yoke Shaft 6. Yoke Sub-Assembly 7. Torsion Spring 8. Roll Pin 9. Secondary Lock, Right-Hand 10. Cam Plate 11. Lock Guard 12. Pin 13. Lock Pin 14. Lock Jaw 15. Washer 16. Right-Hand Release Handle 17. Left-Hand Release Handle 18. Secondary Lock, Left-Hand Fig. 2, Holland Fifth Wheel 5. The lever bar and operating handle must be in proper alignment. See Fig. 4 . Compare the lever bar and operating handle alignment to a new, or a properly operating lever bar and operating handle.
Replace any bent or misaligned lever bar or operating rod. 6. Check all cotter pins for cracking or damage. Re- place any cotter pin that shows any signs of damage. 7. Level the fifth wheel plate to a horizontal posi- tion. Measure the height from a stationary mounting point (see Fig. 5 , Ref. 3), such as the Heavy-Duty Trucks Maintenance Manual, October 2009 31/3