Freightliner — FLA COE, FLB COE, FLC112 Conventional, FLD Conventional, FLL COE

Frame and Fifth Wheel 31 Replace malfunctioning valves. After replacing the valves, recheck for proper system operation. 3. With the parking brake set , determine that the brakes have been applied. Pull the Touchloc con- trol valve. The air cylinder should activate the air mechanism unit. If the air cylinder does not function, check the inversion and cab control valves for proper operation. 3 4 Replace the malfunctioning valves. 6 After replacing the valves, recheck for proper system operation. 5 1 2 NOTE: Neither the vehicle nor the air mecha- nism system should be operated when the spring brake section is caged. f310550 09/12/96 1. Air Cylinder 2. Slide Cam and Housing 3. Return Spring 4.

Housing Weldment 5. Operating Rod 6. Safety Indicator 4. Remove the chocks from the tires. Fig. 8, Touchloc Control Mechanism Component Inspection 31–02 Fifth Wheel Lubricating 4. Inspect the housing weldment for cracks, warpage, or damage. If cracks are found, replace the component. To maintain proper fifth wheel operation, always lubri- cate the fifth wheel after an inspection has been performed. 5. Inspect the operating rod for cracks, warpage, or damage. If cracks are found, replace the compo- nent. IMPORTANT: Lubricate the fifth wheel: After power washing, or steam cleaning. 6. Check the safety indicator for proper function.

When the air mechanism unit is activated, the operating rod is forced into the lockset position and the safety latch will rotate toward the rear. If the vehicle operates in harsh conditions such as salt spray from road surfaces, or in ex- tremely dusty environments. After any service that requires the removal of lubrication from the fifth wheel head or compo- nents. 7. Check the exhaust seat and inlet valve seat for nicks or burrs. Inspect all rubber parts for signs of cuts, abrasion, swelling, or deterioration. Re- place as necessary.

ASF Touchloc Control Mechanism System Operation Check WARNING Failure to properly lubricate the fifth wheel could result in a possible disengagement of the trailer from the tractor, which could result in personal injury or property damage. Fontaine 1. Park the vehicle and chock the tires. 2. With the parking brake not set , pull the Touchloc control valve. The air cylinder should not activate the air mechanism unit. Use a multipurpose extreme pressure (EP) chassis grease, and lubricate all moving parts on the fifth wheel.

When lubricating the top plate at the grease fittings for the bracket bearing area, tilt the top plate forward and backward to evenly distribute the If the air cylinder is activated, check the inversion and the cab control valves for proper operation. Heavy-Duty Trucks Maintenance Manual, October 2009 31/6