Komatsu — WHEN REQUIRED

. MAINTENANCE MAINTENANCE PROCEDURE at an it in 4 - 21 Install Air Cleaner 1. Open the engin e hood at the front side of the machine, re 6 hooks (2), th 2. Hold the outer element (5), rock it lightly up and down a the left and rig ht, and rotate the element to the left and ri pull it out. Do not remove inner element (6) when d 3. When the oute r element (5) has been rem oved, check th inner element angle. If is is straight. has not come out of posi tion and is not 4. Wipe off or bru sh off the dirt stuck to cove r (3) and the ins the air cleaner 5. Remove any di rt or dust that is accumulat ed to evacuator (4) installed to NOTICE The inner element must not be cleaned and us ed again.

When r eplacing the outer element, replac e the inner element at the same time. If the inner elemen t is not installed properly and the outer element and cov er ar einstalled, there is da nger that the outer element will be damaged. The seal portion o n imitation parts lacks precis ion, and allows th e entry of dust, which leads to da mage of the engine. Do not use such imitation parts. 6. Remove inner element (6), then quickly i nstall the new i Insert the inner element securely so that it does not mov 7.

Push the new outer element (5) in straig ht with your han d when installing it to the air cl If the element i s held and rocked lightly u p and down and to the l eft and right while pushi ng it in, the element can be inserted ea