. MAINTENANCE MAINTENANCE PROCEDURE MAINTENANCE MAINTENANCE PROCEDURE 5. Push 6. Clean the adapter, insert new the socket REMARK Turn the tooth upside down and rotate the installation positions. Such practice allows wear on the teeth to develop evenly, the lifetime to be extended, and the replacement frequency to be reduced. 4 - 30 or with o remove the te eth (2 ammer i n the directio n of new toot pin (1), then ti ghten 9 0° c lockwise with lock the pin and complete the i nstallation NOTICE To prevent a tooth from slippi ng off, also replace th e pins with a new one when the teeth are replace d.
To prevent to oth (4) and (5) at t he eithe r end from slipping o ff, insert the pins from wit hin (i.e. in the dir ection s how n wit h an arrow).