. MAINTENANCE MAINTENANCE PROCEDURE REPLACE FUEL PRE-FILTER CARTRIDGE WARNING it. to remove it. 4 - 50 EVERY 500 HOURS M Maintenance for every 10, 100, and 250 hours of service s hould b e performed at the sa After the engine has been o perated, all parts are at high temperature, so do not replace the filter i mmediately. Wait for all parts to cool down before startin g the operation. inside the engine fuel piping system when the engine is running. High pressure is generated inside the engine fuel piping syste m when t When replacing the filter, wait for at least 30 seconds after stopping th e engine to let the inter nal pressure go down before replacing the filter. me close.
Do not bring any fire or fla NOTICE Genuine Komatsu fuel filte r cartridges use a special filter that has hig hly efficient filtering abil ity. When replacing the filter cartridge, always use a gen uine Komatsu part. The common rail fuel injec tion system used on this machine c onsists of more precise parts th an the conventional inj ection pump and nozzle. If any part other than a gen uine Komatsu filter cartridge is used , dust or dirt may get in and caus e problems with the inj ection system. Always avoid usin g substitute parts. When carrying out inspecti on or maintenance of the fuel system , pay m ore attention than norm al to the entry of dirt.
If dirt is stuck to any part, use fuel to wash it off completely. Prepare a container to c 1. Turn valve (1) at the bo ttom of the fuel tank to the right t o close 2. Open the engine hood . 3. Set the container to ca tch the fuel under the filter cartridge (2). 4. Using a filter wrench, turn transparent cap (3) to the left to remove it. (This cap is 5. Using a filter wrench, t used again.) urn filter cartridge (2) counterclockwise