Komatsu — EVERY 500 HOURS MAINTENANCE

. MAINTENANCE MAINTENANCE PROCEDURE 3. Remove 3 bolts (2), then remove cover (3). REMARK 4 - 52 CHECK SWING PINION GREASE LEVEL, ADD GREASE Prepare a scale. 1. Before starting the ins pection, swing 2 times to the right or left, then lower the work engine. Open the grease pu then remove spare g grease can. Whe into tapped bolt hole (4) a nd then remove cover (3). grease and check that the d 4. Insert a scale into the epth of the grease is approx. 60 mm (2.4 in).

Add grease if ne Insert the scale (A) in the position shown in the dia gram on the right when measuring If th e grease is particularl y milky due to ingress of wate r, etc., then remove bolts (5) and cov er (6) from the bottom of the track frame and remove the grease. R eplace all of the grease with n ew grease. The total amount of grea se is 65 liters (60 kg) [17.17 US gal (132 lb)]. 5. Install cover (3) with b