Komatsu — EVERY 500 HOURS SERVICE

. MAINTENANCE SERVICE PROCEDURE REPLACE ADDITIONAL FUEL FILTER CARTRIDGE WARNING 4 - 53 After the engine has be en operated, all parts are at high t emperature, so do not repla ce the filter imme diately. Wai t for a ll parts to cool down before st High pressure is gener ated inside the engine fuel piping system when t he engine i When replacing the filt er, wait for at least 30 seconds a fter stopping th e engine to let the internal p ressure go down before replacing the filter. Do not bring any fire o Be careful when openi ng the air bleed plug in the fuel fil ter head.

It is s till under pr essure, so fuel m ay spurt out NOTICE Genuine Komatsu fuel filter cartridges use a special filt er that has hig hly efficient filtering ability. When replacing t he filter cartridge, always use a genuine Komatsu part. The common rail fuel i njection system used on this mac hine consists of more pre cise parts than th e conventional in jection pump and nozzle. If any part other than a genuine Komatsu filter cartridge i s used, dust or dirt may ge t in and cause pr oblems with the in jection system. Always avoid using substitute parts. When carrying out insp ection or maintenance of the fuel system, pay m ore attentio n than normal to the entry of dirt.

If dirt is stuck to any part, use f uel to wash it off completely. Container to catch th e oil ch e. Prepare a filter wren 1. Close the fuel valv 2. Set the container to cartridge. 3. Using a filter wren remove it. 4. After removing the inspect it. If there i 5. Clean transparent Coat new seal (2) 6. Install transparent Tightening torque: 1. Close the fuel valv catch the fuel under the additional fuel filter ch, turn filter cartridge counterclockwise to filter, remove transparent bowl (1) and s any damage, replace it with a new part. all it. (3). 5. Clean transparent bowl (1) and remove seal (2). with clean fuel or oil, then inst 6.

Install transparent bowl (1) to new filter cartridge 10 Nm (1 kgm , 7.2 lbft)