Daimler Trucks North America LLC Western Star — Western Star

Brakes 42 the Western Star Workshop Manual for inspec- tion, troubleshooting, and repair procedures. 5. Start the engine and build air pressure to at least 100 psi (689 kPa). Shut down the engine. 4. Measure the applied chamber stroke. See Table 1 for the proper stroke for the type of chamber being used. If the stroke is too short, the brakes may drag or will not fully apply. Check for improper operation or adjustment of the slack adjuster. See Group 42 of the Western Star Workshop Manual for inspection and trouble- shooting procedures. 6. Check all of the foundation brake components for damage, wear, and loose or missing parts. Re- pair as needed.

See Group 42 of the Western Star Workshop Manual for repair procedures. Brake Chamber Stroke Specifications Chamber Max Applied Stroke: inch (mm) Manufacturer Type * Size 9 1-3/8 (35) 12 16 Standard Stroke 1-3/4 (45) 20 24 30 2 (51) Gunite 36 2-1/4 (57) 16 Long Stroke 24 (2-1/2 inch rated stroke) 2 (51) 20 24 (3-inch rated stroke) 2-1/2 (64) 30 12 1-3/8 (35) 16 Standard Stroke 1-3/4 (44) 20 Haldex 24 2-1/2-Inch Extended Stroke 24 2 (51) 3-Inch Extended Stroke 24 2-1/2 (64) Standard Stroke 30 2 (51) Long Stroke 30 2-1/2 (64) Western Star Maintenance Manual, September 2015 42/9