Daimler Trucks North America LLC Western Star — Western Star

Frame and Frame Components 31 C 1 E 2 D 3 A F 09/02/2009 f311100 1. Jam Nut 2. Adjustment Bolt 3. Grease Zerk Fig. 10, Jost Fifth Wheel G H springs for proper compression. Replace if needed. B 9.4 The outboard slider assembly requires no adjustment. If the plungers are loose, in- spect and replace locking mechanism parts as needed. 09/01/2009 f311099 A. Checking for fore/aft play. B. Rotating tester in lock. C. Engage hook. D. Pull/push handle fore/aft. E. Check for movement of kingpin in lock. F. Disengage hook. G. Push/pull handle inboard/outboard. H. Rotate lock tester. 9.5 The inboard slider is adjustable for frame width and plunger engagement.

For ad- justment, refer to the fifth wheel installa- tion instructions. 10. Replace cracked, worn, or damaged parts with new parts. Replace all loose mounting bolts with 5/8–11 SAE grade 8 bolts, grade C locknuts, and hardened washers. Do not re-use bolts, nuts, and washers on fifth wheel mountings. Fig. 9, Jost Fifth Wheel Adjustment If the plungers will not release, check the air cylinder or plunger adjustment. If the plungers are loose, check the plunger adjustment and the plunger 11. After inspecting the fifth wheel, lubricate all mov- ing parts with a chassis or multipurpose grease. Apply a generous coating of grease to the top Western Star Maintenance Manual, September 2015 31/6