Daimler Trucks North America LLC Western Star — Western Star

Suspension 32 conditions are present, or the restrictor can is missing, replace it. Hendrickson RT Series WARNING WARNING Replace all cracked or missing restrictor cans. Failure to do so could lead to loss of vehicle con- trol, which could result in property damage, seri- ous personal injury, or death. Before making any inspections, always make sure that the vehicle’s park brake is set and that the wheels are chocked to prevent accidental vehicle movement to prevent serious injury. 7. Check the shock absorbers. For instructions, see Maintenance Operation 32-01 , "Suspension Inspection." Hendrickson RS Series 1. Inspect the fasteners that attach the suspension brackets to the frame. See Fig.

8 . See Group 00 for bolt torque specifications. 1 2 WARNING Before making any inspections, always make sure that the vehicle’s park brake is set and that the wheels are chocked to prevent accidental vehicle movement to prevent serious injury. 3 4 1. Inspect the fasteners that attach the suspension brackets to the frame for proper torque. See Group 00 for bolt torque specifications. WARNING Be sure that the fasteners are torqued correctly. Fasteners that are not tight can cause separation of components or premature failure of compo- nents, loss of vehicle control and possible per- sonal injury or property damage. 07/05/2001 f320906 1. Front Axle Stop 2. Number 1 Spring Bracket 3.

Number 2 Spring Bracket 4. Number 3 Spring Bracket 2. Visually inspect each frame hanger for any evi- dence of cracks and rust streaks coming out from between the frame rail and the bracket. Fig. 8, Hendrickson RT Series Suspension 3. Visually inspect the load cushions for cuts and swelling. Cushions cut by the retaining lips of the saddles of frame hangers indicate the cushions may not be the correct hardness or configuration for the use of the vehicle. WARNING Be sure that the fasteners are torqued correctly. Fasteners that are not tight can cause separation of components or premature failure of compo- nents, loss of vehicle control and possible per- sonal injury or property damage. 4.

Check the shock absorbers. For instructions, see Maintenance Operation 32-01 , "Suspension Inspection." 2. Check that the torque on the number one spring bracket lock bolts is 45 to 63 lbf·ft (62 to 85 N·m). See Fig. 8 . 3. Inspect the leaf springs for worn or broken spring leaves. Western Star Maintenance Manual, September 2015 32/6