4M41 ENGINE - Cylinder Head and Valve Mechanism 11B-16-3 REMOVAL SERVICE POINTS A A " CYLINDER HEAD ASSEMBLY / CYLINDER HEAD GASKET REMOVAL Caution When removing the cylinder head gasket 16, use care not to scratch the cylinder head assembly 15, crankcase assembly and timing gear case assembly. (1) Loosen the cylinder head bolts stepwise in the sequence of the numbers shown, then remove them. 11 4 8 9 12 13 18 16 1 5 2 3 6 7 10 11 14 17 15 12, 13 G Caution Provide one punch mark G on the head of the cylinder head bolt 12, 13 each time the bolt is tightened. Replace the bolt that already has three punch marks (the evidence of having been tightened three times).
(2) Lift up the cylinder head assembly straight and remove, while keeping the camshaft sprockets *a in engagement with the timing chain *b . (3) After the cylinder head assembly is removed, hold the camshaft sprockets *a with the special tool to keep the timing chain *b on it. 15 G Component Parts of the Special Tool MH063490 - Cam Sprocket Holder Kit A : Nut B : Washer C : Spacer D : Adjusting plate E : Nut F : Bolt G : Bolt C G E F *b C *a D A B PWEE9409-D E Feb. 2000 Mitsubishi Motors Corporation Added