DRIVING - Axle and Suspension terrain and preparing to drive on an improved surface. 1. Maintain your vehicle speed (accelerator depressed) and move the Range Selector lever to LOW. 2. Keep driving with the accelerator depressed until you want the axle to downshift. 3. To make the axle downshift, release and depress the accelerator quickly to increase the engine rpm. The axle will shift to LOW range. 4. You are now in the LOW axle range for rough terrain and heavy loads. Shift the transmission normally to maintain the desired speed. steerable).
Without the extra axle, the excessive weight can reduce the service life of vehicle components such as, but not limited to, the frame rail, axles, suspension and brakes. Operation of the auxiliary axles includes the proper maintenance of the system and calibration of its controls. Operating the auxiliary axles will also require a firm understanding of the Gross Axle Weight Rating (GAWR) and the load that is being carried. The vehicle will have switches on the dash to control the position of the auxiliary axles. In certain situations, however, the system will override the controls to protect the axle system. Replace with new text:
For Self Steering Lift Axles, the axle will raise when the park brakes are applied or if the vehicle is placed in reverse. For Non-Steer Lift Axles, the axle will only automatically raise if the park brakes are applied and there are no park brakes on the lift axle. Non-Steer Lift Axles do not automatically raise when the vehicle is placed in reverse. Operating the auxiliary liftable axles must be performed in a manner that does not exceed the axle creep rating.
Axle creep ratings are weight and speed limits that are allowed while the vehicle is fully loaded (in excess of the vehicle’s standard GAWR) When you go from rough terrain to highway driving, shift the axle to the HIGH range following this procedure: 1. Be sure the differential is UNLOCKED. 2. Maintain your vehicle speed (accelerator depressed) and move the Range Selector lever to HIGH. 3. Keep driving with the accelerator depressed until you want the axle to shift. 4. To make the axle shift, release the accelerator until the axle shifts. You are now in the HIGH axle range for highway speeds. Shift the transmission normally to reach your desired cruising speed.
4 What is an Auxiliary Axle Adjustable auxiliary axles (commonly known as Pusher or Tag axles) can add to the productivity of the vehicle by increasing the load capabilities of the vehicle when they are in the deployed (down) position. How to Operate Two Speed Axle - High to Low These steps should be used if operating a 2 speed axle in HIGH range on improved roads and preparing to drive on rough terrain. When you go from highway driving to rough terrain, shift the axle to the LOW range following this procedure: There are different configurations of axles with different functionality (liftable versus 158 Y53-6047-2HEN (03/18)