DRIVING - Axle and Suspension exceeds the gross axle weight rating of the axles. Operator's using vehicles equipped with liftable auxiliary axles must consider creep ratings when any liftable axle is unloaded or in the raised position. Liftable auxiliary axles should only be raised (or unloaded) to improve maneuverability in an off-road use or when vehicle is unloaded. NOTE CAUTION Axle Creep ratings MUST NOT be ex- ceeded. A change in tire size on either the aux- iliary axles or the drive/steer axles can change the calibration of the auxiliary axles. If tires are installed with a differ- ent loaded radius, the calibration pro- cedure must be repeated.
Failure to do so can cause equipment damage. CAUTION 4 WARNING Always lower the axles as soon as possible after receiving a load. Never exceed 5 miles per hour when driving with a load with the auxiliary axle(s) raised/unloaded. Failure to lower the axle(s) can overload the frame and re- maining axles, and could cause equip- ment damage. Never operate the vehicle with more pressure in the lift axles than is neces- sary to carry the load, as determined by the calibration procedure described.
Failure to do so can result in loss of traction and stability at the steer and/or drive axles and can result in increased braking distance, which could cause loss of vehicle control resulting in an accident. Failure to comply may result in death, personal injury, equipment or property damage. Contact your dealer or axle manufacturer to determine what the creep rating is for your particular axle(s) and configuration. Creep ratings are generally limited to the following:
Tandem rear axles only Straight trucks only Maximum spring mount centers per axle manufacturers specifications Maximum tire static loaded radius (SLR) per axle manufacturers specifications Related concepts CAUTION DO NOT modify the air system and/or control functionality on a factory instal- led auxiliary axle(s). Modifying the fac- tory operation of the pusher and/or tag axle(s) will void your warranty, and can cause equipment damage. Pusher or Tag Suspension Calibration Calibrating the suspension is important to ensure that the correct axle loads meet 160 Y53-6047-2HEN (03/18)