. MAINTENANCE SERVICE PROCEDURE REPLACE FUEL TANK BREATHER ELEMENT WARNING parts are at high temperature, and this will cause burns. Wait for the 3. Install cover (3) and nut (2). 4 - 67 7. After b leeding the air , start the engin e and chec k for any leakage of fuel from the filter se al surface. If there is any lea kage o f fuel, c heck the tightening o f the fil ter cartridge . If t here is still leakage of fue l, repeat Steps 1 and 2 to re move th e filter cartridge, then check for da mage or embedded material in the packi ng surface.
If there is any da mage o r embedded material in the p acking surface , replace the cartridge with a new part, then repeat the proced ure fro m Step 3 and Immediately temperature to go d own bef ore startin g the o peratio 1. Remo ve nut ( 2) of br eathe r assembl y (1) at the t op surface o the fue l tank, then re move cover (3) 2. Replac e breather ele ment (4) with a new