MAINTENANCE 4 Clean Suction Filter --- when changing hydraulic oil The suction filter is located on the bottom side in the hydraulic oil tank. Clean the suction filter when changing hydraulic oil. 2 ZX14-3, 16-3, 18-3 1. After draining hydraulic oil, remove suction filter (2) together with cover (1). 1 2. Clean the hydraulic oil tank interior and the suction filter (2). ZX14-3, 16-3, 18-3 M503-07-027 3. Install suction filter (2) together with cover (1) to the hydraulic oil tank. 4. Bleed air from the hydraulic system. (Refer to 7-27 “Bleed Air from Hydraulic System”) Wrench size : 13 mm Tightening torque : 20 N m (2 kgf m, 15 lbt ft) 1 ZX27-3 1.
After draining hydraulic oil, remove cover (1). Take care 2 not to allow the O-ring to come off cover (1) at this time. 2. Remove suction filter (4) together with rod (3). 3. Clean the hydraulic oil tank interior and suction filter (4). 4. Install suction filter (4) together with rod (3) to the suction pipe. 5. Install cover (1) so that rod (3) is securely inserted into support (2) on cover (1). 3 6. Secure cover (1) with four bolts. Wrench size : 13 mm Tightening torque : 10 N m (1 kgf m, 7.5 lbt ft) 4 ZX27-3 M1M7-07-002 7-33