OPERATING ENGINE Check Machine After Starting Engine IMPORTANT: In case any abnormality is found in the monitor, immediately stop the engine. Trace the cause of the problem. 1 2 Check Using the Monitor After the engine has started, check the following points through the monitor. 1. Check that alternator indicator (1) is OFF. In case alternator indicator (1) stays ON, immediately stop the engine. Then, check the alternator and/or battery system for any abnormality. ZX14-3, 16-3, 18-3 M1NC-01-005 2. Check that engine oil pressure indicator (2) is OFF. In case engine oil pressure indicator (2) stays ON, immediately stop the engine.
Then, check the engine oil pressure system and/or the oil level for any abnormality. 3 Check Engine Noise and Exhaust Gas 4 Check that engine noise and exhaust gas are normal. f NOTE: Checking exhaust gas (With no load, after warming up) Colorless or faint blue normal (complete combustion) Black abnormal (incomplete ZX27-3 M1NC-01-022 combustion) White abnormal (burning oil or coolant leakage into cylinder) 3-5