Komatsu — WHEN REQUIRED

. MAINTENANCE SERVICE PROCEDURE REPLACE FAN BELT, ADJUST AUTO-TENSIONER bolt (1), and 4 - 40 Replace the V-belts if they co ntact th e botto m of the pulley grooves, if they are lower tha n the outside diameter o the pulleys, o r if they are cracked or f laking. REPLACEME 1. Loosen l remove it from yo ke (3) w ith lock nut (2) still f itted Ther e is danger o f losing parts, so do not remove bolt ( 1) from bracket ( 2. Use an a djustabl e wrenc h when the length of lever (7) of the tension p ulley br approx. 8in), lever strongly. spring is ex 3. The spri tended ulley moves inwards, so remo ve the o ld belt a nd replace i t with a ne w one. Always r eplace th e V-bel ts as a s et (5 b elts)