Yamaha Grizzly 660 — Yamaha Grizzly 660 User Manual

CHECKING THE ENGINE OIL LEVEL CHECKING THE ENGINE OIL LEVEL 1.Place the machine on a level surface. 2.Remove: Engine side panel Refer to “SEAT, CARRIERS, FENDERS AND FUEL TANK”. 3.Check: Engine oil level Oil level should be between the maximum 1 and minimum 2 marks. Oil level low Add oil to the proper level. NOTE: Do not screw the dipstick 3 in when checking the oil level. NOTE: Recommended oil classification: API Service “SE”, “SF” type or equivalent (e.g. “SF–SE–CC”, “SF–SE–SD” etc.) CAUTION: Do not allow foreign material to enter the crankcase. 4.Start the engine and let it warm up for sev- eral minutes. 5.Stop the engine and check the oil level again. NOTE:

Wait a few minutes until the oil settles before inspecting the oil level. WARNING Never remove the dipstick just after high speed operation because the heated oil could spurt out. Wait until the oil cools down before removing the dipstick. 6.Install: Engine side panel 3 - 26 CHK ADJ CHK ADJ Recommended oil: Follow the left chart.