CHANGING THE ENGINE OIL CHANGING THE ENGINE OIL 1.Start the engine and let it warm up for sev- eral minutes. 2.Stop the engine and place an oil pan under the engine. 3.Remove: Seat Fuel tank side panel (left) Engine side cover Refer to “SEAT, CARRIERS, FENDERS AND FUEL TANK”. 4.Remove: Engine oil filler plug (dipstick) 1 Engine oil drain bolt 2 Drain the engine oil from the crank case. 5.If the oil filter cartridge is also to be replaced, perform the following procedure. ***************************************************** Replacement steps: Remove the oil filter cartridge 1 with an oil filter wrench 2 . Lubricate the O-ring 3 of the new oil filter cartridge with a thin coat of engine oil.
CAUTION: Make sure that the O-ring 3 is positioned correctly in the groove of the oil filter car- tridge. Tighten the new oil filter cartridge to specifi- cation with an oil filter wrench. ***************************************************** 3 - 27 CHK ADJ CHK ADJ Oil filter wrench: P/N. YU-38411, 90890-01426 R. T. Oil filter cartridge: 17 Nm (1.7 m • kg, 12 ft • lb)