Yamaha Grizzly 660 — Yamaha Grizzly 660 User Manual

ADJUSTING THE TOE-IN ***************************************************** Measurement steps: NOTE: Before measuring the toe-in, make sure that the tire pressure is correct. Mark both front tire tread centers. Raise the front end of the machine so that there is no weight on the front tires. Face the handlebar straight ahead. Measure the width И between the marks. Rotate the front tires 180° until the marks are exactly opposite one another. Measure the width Й between the marks. Calculate the toe-in using the formula given below. Toe-in = Й И If the toe-in is incorrect, adjust it. ***************************************************** 3.Adjust:

Toe-in WARNING Be sure that both tie-rods are turned the same amount. If not, the machine will drift right or left even though the handlebar is positioned straight. This may lead to mis- handling and an accident. After setting the toe-in to specification, run the machine slowly for some distance with both hands lightly holding the handlebar and check that the handlebar responds cor- rectly. If not, turn either the right or left tie- rod within the toe-in specification. 3 - 52 CHK ADJ CHK ADJ